农机网

秸秆的影响煤成型机雨后是好的-秸秆成型机 饲料颗粒机 反击式破碎机 螺旋分级机
誉恒品牌秸秆煤成型机,干稻草,稻草,树皮和其他原材料,也被雨水浸泡,或其他原因引起的湿稻草、树叶、树枝、稻草和其他中国的原材料。
雨后,雨湿的稻草和其他材料,怎么办?河南誉恒机械设备有限公司是生产的秸秆煤成型机设备可以干,湿稻草、麦秸,处理后可以喂动物。它还为用户减少了材料的空间. .秸秆煤成型机输出从1吨每小时2.5吨每小时。各种类型和输出满足不同用户的不同需求。-秸秆成型机 饲料颗粒机 反击式破碎机 螺旋分级机
秸秆煤成型机,一年四季,无论天气可以帮助你处理的废弃物,其将废物转化为财富,所以你获得第二,燃料,也为用户减少家庭支出。秸秆煤成型机完成燃烧热值高、直径大小可调,选择不同的光盘可以根据用户的需要。
正如你指出的错误誉恒饲料颗粒机
许多农民为了提高生产加料速度,开始使用饲料颗粒机。但不清楚先知饲料颗粒机失败,誉恒今天告诉你,可以看到从颗粒机密失败?-
首先,饲料颗粒机生产颗粒机后发现粒子表面不均匀,甚至粒子上面有很多额外的伤口。这个问题表明,粒子的叶片在机器内部有问题,如果叶片完整生产粒子表面非常光滑,几乎大小进行了比较。
第二,粒子的表面太光滑,这也是一个问题,可以机械硬过高,颗粒饲料机环模式压缩率相对较小,增加了压缩洞,这种现象是相对罕见的,很难满足这类问题,而且早期尽量避免施工时间,施工前要做的*件事就是饲料检查对象,如没有困难。
第三,当水太高时,阻止机器的现象经常发生,所以我们试图进行施工后测试粒子的水分。如果饲料颗粒机太多水当我们必须干燥,或晒干,尽量避免在湿颗粒结构,这样会增加机械上的负载,它是影响饲料颗粒机的正常运行。
河南誉恒机械设备有限公司是生产的谷物饲料机的优势高产、低能源消耗,为你提供完善的售后服务,欢迎各地朋友来我公司参观,学习。
The effect of the straw coal forming machine after the rain is good
Yuheng brand straw coal molding machine, for dry straw, straw, bark and other raw materials, but also for being rain soaked, or other reasons caused by the wet straw, leaves, twigs, straw and other Chinese raw materials.
After the rain, straw and other materials wet by the rain, how to do? Henan Yuheng Machinery Equipment Co., Ltd. is the production of straw coal molding machine, the equipment can be dry, wet straw, wheat straw, after processing can be fed animals. It also reduces the space of material for the user.. Straw coal molding machine output from 1 tons per hour to 2.5 tons per hour. Various types and output meet the different needs of different users.
Straw coal molding machine, all the year round, in any weather can help you deal with the side of the waste material, its turning waste into treasure, so you get the second, fuel, also for the user to reduce the household spending. Straw coal molding machine finished high combustion heat value, diameter size adjustable, choose different disc can according to user needs.
As you point out the fault Yuheng feed particle machine
Many farmers in order to improve the production feed rate, are starting to use the feed pellet machine. But it was not clear how prophet feed particle machine failure, Yuheng today to l you that from what can be seen pellet confidential failure?
First, feed particle machine for producing granular machine after found particles surface is uneven and even particle above have a lot of extra wound. This problem shows that the blade of particles inside the machine there is a problem, if the blade intact in the production of particle surface is very smooth and almost the size are compared.
Second, the surface of the particle is too smooth, this is also a problem, which can mechanical hard too high, grain feed machine ring mode compression ratio is relatively small, increasing the compression hole, this phenomenon is relatively rare, hardly meet this kind of problem, but also to early construction of time as far as possible to avoid, the first thing to do is prior to construction of feed check to see if there is no hard objects such as.
Third, when the water is too high, the phenomenon of blocking machine often occurs, so we try to carry out the construction after the test of the particle moisture. If feed particle machine too much water when we have to dry off, or dried, try to avoid in the wet particles when construction as this will increase the load on the mechanical, it is affecting the normal operation of the feed particle machine.
Henan Yuheng Machinery Equipment Co., Ltd. is the production of grain feed machine has the advantages of high yield, low energy consumption, for you to provide perfect after-sales service, always welcome from friends around to my company visit, study.