Cutting head

Head of hedge cutters permits maximum working flexibility, thanks to its rotation angle of 246°; balanced rotor warrants absence of vibrations.

Contour Following System (CFS)

Floating head allows user to follow uneven ground contours without acting on motion cool. A safety system limits maximum head oscillation so, in case of sudden level drop, risk of head falling or tractor overturning are prevented.

Strong junctions

All hinges have pins made of hardened, heat-treated steel; bushings are wear resistant and provided of lubricating nipples.

Reversible rotor

It’s possible to invert spin direction of rotor: this makes the machinery suitable both to cut grass, shrubs (clockwise spin) and operate close to water along rivers (anticlockwise spin). To prevent any accidental inversion, the lever for this function has a safety block.

Hydraulic shut off

Hydraulic circuit can be blocked by shut-off valves: this allows user to perform safely maintenance operations, without any dangerous accidental movement of the arm.

Cast Iron rotor gear pump

Cast iron made gear pump is more resistant to high temperatures comparing to aluminum: this technical choice is suited to professional use under intense and stressing work conditions.

Safety systems

In case of sudden rotor arrest, a safety valve drops pressure from hydraulic engine to prevent any damage.

A double safety system is active when the arm encounters any obstacle. First protection is a nitrogen dampener working with a hydro-pneumatic circuit. If first system is not sufficient a max safety valve, acting on a cylinder, turns back 90° the arm.