我公司已成功研制出大口径塑料管材全自动撕碎机组。

该机组自动化程度高，生产效率高，能使用户经济有效的回收大口径塑料废品、管材及机头料。

单轴撕碎机由电机、硬齿面减速机、旋转刀轴、进口的动刀、定刀、机架、机座、箱体、油压缸、油泵等主

要结构组成。

机架上装定刀、旋转刀轴上装有可卸式嵌入动刀，且动刀是一四角面可使用刀，用钝后拆下更换角度，经热

处理后硬度达HRC600°以上，因此使用寿命久，切削能力强，产能高，有效的降低劳动强度，改善作业环境。

Our company has successfully developed the automatic shredder units for large diameter plastic tubing .

This shredder unit has a high degree of automation and high production efficiency .Users can recycle the large diameter

 plastic waste ,pipes ａnd material economically and effectively by using this shredder .

The single-shaft shredder is composed of motor ,hardened reducer ,rotating knife shaft ,imported moving-knife , fixed

 knife ,rack ,engine base ,cabinet ,oil hydraulic cylinder ,oil pumps and other main structures .

The fixed knife is installed on the rack ,ａnd the removable embedded knife is installed on the rotating knife shaft ,

ａnd the moving-knife can be used in one-four-edge surface ,ａnd removed to change angle after it was getting blunt.

主要技术参数 The main technical parameters