连续自动高效地清除散状物料中的铁杂质;耐高温、磁力强、寿命长、无须专人看管;磨机产量提高15%以上,钢球、钢段、衬板磨损减少20%以上。

|| 特点:

1、实现了除铁过程的连续性、自动化。设备启动后无需看管，铁杂质自动分离排至机外。

2、采用高剩磁钕铁硼作磁源，利用多组运动磁组捕捉铁杂质，除铁效率高，结构新颖。

3、适用于封闭物料输送系统，工作中无粉尘逸出，对环境无污染。

4、动力源采用小功率减速电机，体积小、重量轻、运行可靠平稳、故障少，使用方便，维修容易。

5、采用特殊耐磨材料，使用寿命成倍提高。

|| 工作原理:

除铁器串接于倾角45° -75° 的物料输送管道中,当物料流经该除铁器时，其中的铁磁性物质被吸附在管道除铁器的锰钢管壁上,随永磁体的移动而逐渐滑向出铁口，实现与物料分离。在出铁口处，因永磁体沿循环运动方向移开，铁磁性物质失去磁力吸引,在重力的作用下从出铁口排出，实现物料的自动除铁。

Continuous automatic and efficient removal of iron impurities in bulk materials; High temperature resistance, strong magnetic force, long life, no need for special care; The mill output is increased by more than 15%, and the wear of steel ball, steel section and lining plate is reduced by more than 20%.

 || Features:

1. Realized the continuity and automation of iron removal process. No need to take care of the equipment after starting, iron impurities are automatically separated and discharged out of the machine.

2. Using high remanent NdFeB as magnetic source, using multiple moving magnetic groups to capture iron impurities, with high iron removal efficiency and novel structure.

3. Applicable to closed material conveying system, no dust escaping during work, no pollution to the environment.

4, The power source adopts small power reducer motor, small volume, light weight, reliable and stable operation, few faults, easy to use and easy to maintain.

5, the use of special wear-resistant materials, the service life is doubled.

 || works:

The iron separator is connected in series in the material conveying pipeline with a dip Angle of 45° -75°. When the material flows through the iron separator, the ferromagnetic material is adsorbed on the manganese steel pipe wall of the iron separator in the pipeline, and gradually slides to the iron outlet with the movement of the permanent magnet to realize the separation from the material. At the iron outlet, because the permanent magnet moves away along the circular motion direction, the ferromagnetic material loses its magnetic attraction and is discharged from the iron outlet under the action of gravity, thus realizing the automatic iron removal of materials.