端面配流液压马达BM5系列装载机(BM)

端面配流液压马达BM5系列装载机(BM)

参考价: 面议

具体成交价以合同协议为准
2017-04-19 22:27:29
419
产品属性
关闭
山东超越液压机械有限公司

山东超越液压机械有限公司

免费会员
收藏

组合推荐相似产品

产品简介

马达允许串联和并联使用,串联使用时应接外泄油管。

◎ 采用圆锥滚子轴承支撑设计,具有较大的径向承载能力,使得马达可直接驱动工作机构。

详细介绍

BM5系列摆线液压马达

 

 

结构特点

BM5马达是一种端面配流马达。其结构特点:•*的端面配流设计,低速转动平稳。•*的轴密封设计,能承受高背压。•*的配油机构设计, 具有磨损自动补偿功能。•双列圆锥滚子轴承设计能够承受较大的径向力。•多种法兰、输出轴、等安装连接形式。 BM5 motor is a disc valve type gerolor motor.Characteristic features•Advanced design in disc distribution flow, which can provide improved performance at low speed.•Advanced design of shaft seal, which can bear higher pressure.•Advanced distribution mechanism design, which has the automatic compensation function.•Double-rolling bearing design, which permit higher radial loads.•A variety of connection types of flange; Rabbet:, output shaft and oil port.  

主要性能参数 Main Specification

 

1.zui大压力指入口zui大压力,连续工作压力指工作压差.

2.马达不能同时在zui高压力和zui大转速下工作.3.在断续工作条件下,运行时间每分钟不能超过10%.4.*用68#抗磨液压油,粘度37-73cSt,清洁度ISO18/135.zui高工作油温80°6.马达满负荷工作前,应在zui高工作压力的40%以下磨合1h.7.马达允许zui大背压10MPa,但*不要超过5MPa,超过时应接外泄油管. 
1. Intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure
2. Motor should not work under the highest pressure and the maximum speed
3. The running time should not exceed 10% under intermittent working conditions
4. Recommending N68 anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13.
5. The Maximum working temperature is 80 °
6. One hour running time under 40% of maximum working pressure is recommended before full capacity working.
7. The maximum allowable back pressure is 10MPa, but the recommended back pressure should not exceed 5MPa.a leaking pipes is needed when exceeding

BM5 标准系列连接尺寸----外形图 Dimension and Mounting data

 

BM5标准系列 连接尺寸----输出轴 Shaft

 

BM5标准系列连接尺寸----油口 Port

上一篇:您知道装载机的磨合期吗? 下一篇:装载机分类
热线电话 在线询价
提示

请选择您要拨打的电话: