1.断续指入口zui大压力,连续工作压力指工作压差。
2.马达不应同时在zui高压力和zui高转速下工作。
3.马达在断续工作条件下,运行时间应不超过10%。
4.zui高工作温度80°。
5.马达zui高允许背压10mpa,但建议使用背压不要超过5mpa,超过时应接外泄油管。
6.马达满负荷工作前,建议在zui大工作压力的40%以下磨合1小时。
7.*用68#抗磨液压油,粘度37-73cst,清洁度iso18/13.
note: 1. intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure
2. motor should not work under the highest pressure and the maximum speed
3. the running time should not exceed 10% under intermittent working conditions
4. the maximum working temperature is 80 °
5. the maximum allowable back pressure is 10mpa, but the recommended back pressure should not exceed 5mpa.a leaking pipes is needed when exceeding
6. one hour running time under 40% of maximum working pressure is recommended before full capacity working.
7. recommending n68 anti-wear hydraulic oil, viscosity 37-73cst, cleanliness iso18/13.